How to install the driver of the Epson Perfection 1200U/U Photo scanner in Windows 7 32 bit or 64 bit

I have an old but still working Epson scanner that has anyway a good resolution (1200dpi) for scanning documents and also photos. The problem is that in the Epson site you can’t find the driver for Vista, Windows 7 and now Windows 8!! I am very disappointed that a firm like Epson does not support any more a product like that: in november 2009 a guy asked to Epson support and the answer was: “Dear Jeremy, I am sorry you are experiencing difficulties locating a Windows 7 driver for your Epson Perfection 1200U.
At this time, there is no Windows 7 driver for your Epson product. Check www.epson.com/windows7 for future updates as we are still working on posting some drivers. If your product is not listed there, then it is not compatible with Windows 7.Should you require further assistance with this issue, please reply without history (when possible), as our email system contains all previous correspondence. If you have a different technical support issue, please submit another email request via our website (http://www.epson.com/support), and we will respond in a timely manner. Thank you for contacting Epson.”

Now the situation is still the same  😦

Till now I always used an old computer with Windows XP but today I thought it is time to make it work at least on a Windows 7 PC!!

I have a Windows 7 64bit version … so I tried to use the most recent Epson Twain I found in the Epson site: no way!! So I tried to find a solution on Internet and I found this very useful link that clearly explain the procedure for Windows 7 for both 32bit and 64bit version.

In particulare it says:

For Win7 32 bit:

Installing this scanner in Windows 7 or Vista 32bit only requires using compatibility mode and administrator priviledges with the XP driver. Download the most recent XP driver (Twain 5 v 5.53) from one of the Epson websites, eg: link1, link2. These drivers will install both Windows WIA support and Epson’s TWAIN scanning interface.

Run the downloaded self-extracting .EXE file. As it extracts the contents to a new folder it will pause to allow you to confirm the folder’s location (ie. c:\epson\…). At this point uncheck the box that says “When done unzipping run Setup.exe” and then click the Unzip button to continue. If you get a file/folder creation error while unzipping, run the EXE again with administrator priviledges. Next, browse to the Setup.exe file in the newly created Epson folder (eg. c:\epson\epson10245) and set the Compatibility options for Windows XP-SP2 and Run as Administrator. I happened to set these options for ‘All Users’ but that might not be necessary. Make sure that the scanner is NOT plugged in to the computer during the driver installation. Double-click the Setup file to install the scanner drivers and Twain. Reboot the computer.

Now plug in the scanner’s USB cable and turn it on. When doing your test scans you’ll find that certain applications (ie. MS Paint, Paint.NET and others) can only interface with the MS WIA scanner driver, which is very basic. The WIA driver also, apparently, does not recognise the scanner’s TPU (transparency adapter) so it cannot be used for scanning slides or negatives. Epson Twain 5 OTOH works normally for both reflective and transparency scanning. XnView happens to be compatible with the Twain interface if you are in need of an app to test/scan using Epson Twain.

I’ve installed this driver in both Vista and Windows 7. When installed cleanly it works like a charm.

For Win7 64 bit:

This is a completely different situation and requires the use of modified (but still Epson based) drivers. Don’t know who created the driver package… and I don’t care cuz they work. 😉

At this particular point in time the required driver can be found at either of these two links:

http://www.box.net/shared/5rxsn87mqr

http://rapidshare.com/#!download|64cg2|333376396|epsonScan_1.0_Per1200Win64eu.zip|10518

Download the file “epsonScan_1.0_Per1200Win64eu.zip” and un-zip it. Make sure that your scanner is not connected to the computer, then run Setup.exe. Reboot the computer, then plug in and turn on the scanner.

No compatibility settings were required when I installed it, YMMV on that. (A driver installation folder is created in c:\epson, similar to above.)

This installer puts “Epson Scan Ver. 2.68E” on the computer. It’s been modified to include 64bit support for the Perfection 1200U and U-Photo scanners. I don’t know if the Perfection 1200S (SCSI) is also supported. It includes a WIA driver, a TWAIN interface for use with twain compatible software and also a stand-alone scanning utility to scan directly to files. Note that the stand-alone Epson Scan utility will NOT run if the scanner is not turned on. This scanning interface isn’t the identical to Epson Twain 5 but the functionality seems to be pretty much the same.

That’s that. There are other methods for installing this scanner in Windows 7/Vista but these two at least conform to KISS.

If OTOH you’re up to modifying installation files yourself there are some other installation methods discussed at the links below.

http://www.vistax64.com/drivers/176731-epson-perfection-1200-photo-2.html

http://www.fixya.com/support/t3652527-epson_perfection_1200_scanner_driver

Annunci

Informazioni su Enzo Contini

Electronic engineer
Questa voce è stata pubblicata in Review e test. Contrassegna il permalink.

Lascia un Commento/Leave a comment

Inserisci i tuoi dati qui sotto o clicca su un'icona per effettuare l'accesso:

Logo WordPress.com

Stai commentando usando il tuo account WordPress.com. Chiudi sessione / Modifica )

Foto Twitter

Stai commentando usando il tuo account Twitter. Chiudi sessione / Modifica )

Foto di Facebook

Stai commentando usando il tuo account Facebook. Chiudi sessione / Modifica )

Google+ photo

Stai commentando usando il tuo account Google+. Chiudi sessione / Modifica )

Connessione a %s...